Your cart: Items:, Value:

GyroBot 900 Heli Jet

Model Helicopters  | Electrics  | Gyros & V Bar Stabi for Helicopters | LF Technik products GYROBOT ETC | Gyrobot Products |  GyroBot 900 Heli Jet

GyroBot 800 Heli NEW

GyroBot 800 Heli NEW


Price: 224.00 / 277.76

The new GyroBot 800 combines all the requirements of a modern stabilization system into a single device: the first Beginner Mode with rescue WITHOUT switching function (with and without flybar) second Beginner Acro Mode (with and without flybar) for inverted flight training with rescue function WITHOUT switching third Standard Mode for perfect flybarless flying at all flybarless helicopters

It is a logical development from GyroBot 700 and GyroBot 900, with all the findings of the last 5 years have gone and many customer requests have been considered. We have not, however, as usual, saved on the hardware We use to be the best in our opinion sensors (3 pcs Analog Devices ADXRS 622) and additional acceleration sensors. 's firmware has been optimized so that the unit can do even more, and more precise controls, the tuning work but was even more simplified. So there is now only ONE per axis value to be set. It could hardly be easier. The adjustment work is reduced merely be to increase the "sensitivity" of each axis, until a crisp and direct engagement exists. As with any normal tail gyro. Even with the default settings should any commercial model to fly well.

GyroBot The 800 is a very high quality and precise controller incl stabilization for roll, pitch-axis and tail of a model helicopter. All in flight required components are in a very small package (32x32x16 mm). Your model has more power and flight time.

This system can be used in the following modes:

first In Beginner mode with emergency function for beginners
here in addition to the position control is an active tilt control. That is, the GyroBot 800 moves the model back into the horizontal position when the release roll or pitch stick. You need to NOT switch, the emergency function works ALWAYS . The maximum tilt angle of the model is available from 10 - 50 degrees adjustable, the model does not tilt more than this angle. Thus is a very easy learning of hovering and flight now possible. The Beginnermode can continuously be overridden by you (adjustable) so that you step by step to flying a ? normal? Helicopters can be used. The Beginner works in helicopters with or without flybar.

second In the Beginner Acro Mode with rescue function for beginners
, this mode provides all the features of the Beginner Mode and also the opportunity to learn to safely rolls, flips, loops and inverted flight. If you tilt the helicopter with the pitch or roll stick over 90 degrees, the GyroBot turns 800, the model in inverted flight. The rollover or roll ends up getting a stable inverted hovering position, no matter how long you hold the stick in this. In the inverted position there is also an active tilt control. Sun inverted flight is very easy, since you? Emergencies? only need to let go of the stick. Again, this works in helicopters with or without flybar.

third In standard mode for Flybarless (flybarless) Helicopter
This Mode is a very precise control of paddle lots (Rigid) helicopters. This model flies like a flybar helicopter, but without the disadvantages of a flybar. That means there are absolutely neutral and precise flight. You can use it as perfectly precise FAI fly as extreme 3D or scale model with 2-or multi-blade heads. Also very quiet flight characteristics for beginners are easily made. Each model serves a network in a jiffy ? like on rails?.

In all modes you Beginner Acro at the highest level possible. GyroBot is the only system in its class, which added to the 3 highest quality MEMS has gyro sensors 3 acceleration sensors. So it can measure nearly twice as many movements during flight and process them very fast.

GyroBot 800 can also be used by absolute beginners very easily programmed. Do this via the programming box? Cockpit Sport? or USB interface cable for programming on the PC. The programming box? Cockpit Sport? after programming can be removed again, but can optionally be incorporated into the model. With the USB interface cable can GyroBot, 800 programmed via the PC and Service. Specifications: Impact resistant plastic housing sensors: High-MEMS Gyroscopes (drift), added 3 acceleration sensors RISC processor, power supply: 3.0 V - V 12.0 , -for all drive types (electric, IC, gas) and all helicopter sizes. -updateable system will always be via USB interface cable (values ??-Very easy programming, thereby quickly can the right setup can be found. -Supports 120 degrees, 135 degrees, 135 degrees 1:1:1, 140 grade 3 point linkage, 90 degrees and 90 degrees, 45 degrees rotated four point linkage and Direktanlenkung (mechanical mixture) -Provides virtual swashplate rotation for multi-blade heads -Supports all current servo -Includes 3 in-flight switchable via transmitter flight conditions -Is naturally compatible with all PPM, PCM and 2.4 GHz radio control system -Made in Germany sold by Sportsmoto Ltd UK Distributor






Product Gyrobot Heli Jet

Product Gyrobot Heli Jet


Price: 585.50 / 726.02

When GyroBot 900 Heli Jet is a very high quality and precise flight control including stabilization forthe roll, pitch and rear axle of a turbine-powered helicopters.

The system is designed for 2 - multi-blade rotor heads and optimized. A very high quality Beginner Acro is also included.

The device is completely insensitive to disturbing frequencies of the gas turbines. As the only tool in the world, it has special shielding and decoupling from those frequencies. All necessary components are in flight in a single package.

The system can be used in the following modes:


1. Standard Mode
This mode is a highly precise control for flybarless Model Helicopter with rotor heads with 2,3,4,5,6 or more rotor blades. The model flies like a paddle helicopter, but without the disadvantages of a flybar. That is, it is absolutely neutral and accurate flight before a. The control characteristics are specific to heavy and sluggish low turbine helicopter rotor head speeds agreed with. The result is a perfectly straight flight and a precise and clean dosed control behavior. Each turbine model serves a network in no time "as if on rails".

2. Beginner Mode

This is in addition to position control from an active tilt control. That is, GyroBot 900 Heli Jet controls the model back to the horizontal position when you release the roll or pitch control stick. The maximum tilt angle of the model is from 10 - to 50 degrees, the model does not tilt more than this angle. So a very easy learning of hovering and flight is now possible. The Beginner mode can continuously be controlled by you (adjustable), so that you can piece by piece to the flying of a "normal" helicopter used. The Beginner works in helicopters, with or without flybar. This feature can be used eg for floating maneuver in support of the pilot.

3. Beginner Acro Mode
This mode provides all the features of the Beginner mode, plus the possibility of safely learning rolls, flips, loops and inverted flight. As soon as you tilt the helicopter with the pitch or roll stick over 90 degrees, turns GyroBot 900 Heli Jet, the model in inverted flight. The rollover or the role it always ends in a stable inverted flight hovering position, no matter how long you keep the stick in this. In the inverted position is also present an active tilt control. So considerate flight is very easy because you have to let go of the "emergency" only the stick. Again, this works in helicopters, with or without flybar.

In all the modes you have a Beginner Acro at the highest level available. It is especially adapted to low speed rear rotors. It can be in heading hold mode or normal mode. Novel versus normal tail gyros here is the possibility of a? Mix? to fly in two modes. The continuous adjustment of the P and I share, you can adjust as much as Heading Hold, as you need to fly, but no more than the stability and inertia tolerate your tail boom. You can use all the servos for the tail rotor, not only extremely fast but also very strong and somewhat slower servos.

GyroBot 900 Heli Jet is the only system in this class, which added to the 3 highest-quality MEMS gyroscopes and 3 external acceleration sensors. So it can measure almost twice as many movements in flight, and process them very fast. Perfect handling characteristics without much adjustment: For you that means. GyroBot can be programmed quickly and easily by absolute beginners. Do this via the "Cockpit", or a USB interface cable for programming on the PC.

The programming box? Cockpit? can play only for programming, but can either be fixed in the model. With the USB interface cable, the GyroBot programmed via the PC and be updated. The operation in combination with large servos and battery switching is easy.

Technical data:
White powder-coated aluminum case, CNC machined brass chrome plated cover;
Dimensions: 50x50x33 mm, Weight: 180 g
Sensors: High-grade MEMS gyroscopes (drift), in addition 3 acceleration sensors
RISC processor, power supply: 3.0 V - 12.0 V, for all drive types (electric, turbine, IC, gas) and all helicopter sizes.
-Updateable via USB interface cable (the adjusted values remain preserved), 3 in flight over Channel selectable flight modes.
-Very easy to program, this can quickly find a good setup to be found.

MADE IN GERMANY

Model Helicopters  | Electrics  | Gyros & V Bar Stabi for Helicopters | LF Technik products GYROBOT ETC | Gyrobot Products |  GyroBot 900 Heli Jet

Sportsmoto Ltd Company Number 6709642 Ltd in United Kingdom