Sportsmoto Ltd RC Helicopter Specialists Lots of choice of Niche products OCTOBER 2018 Update .
We are shutting the Sportsmoto Ltd company so anything you see on our web site could be discounted from the prices you see . If you email us click here to email us now with the part you have seen here we can give a best offer..
Sportsmoto Ltd and Xaircraft.co.uk are a specialist Internet based company for Niche Radio control models with brands such as Hitec, Gaui, Sonix, Align, XAircraft, Heli Artist, Smartmodel, Eagle Eye, FPV and many more. Our focus is on hard to get products and Innovative parts.
We have plenty of spare parts in stock and complete Jet Joe Engines you can even come and see one working before you buy
We can service your Jet Joe Engine also..
Short Video showing the NEW Scale 3/4 blade scale tail rotor drives
New 4 Point swashplate option for the Sportsmoto Monster head
3,4,5 blade sizes in 600 and 700 size heads. you can order here
Something a little different ! Blue Bird K7 Models
We have on offer 2 sizes of Blue Bird K7 models for RC use and either EDF or Jet Turbine power... Read on click here
We Take Pay Pal and Credit Cards
Just to let you know we take Pay Pal and Debit / Credit Cards at our store SSL secure payments page..Happy Shopping (this will end after November 2018 we will only take pay pal payments
Hitec Radios - Aurora 9 is in stock NOW 7ch and 9 channel
IN STOCK NOW Aurora 9 check it out ! You may have noticed these are in short supply so order now Click to see product
Designed to fit nearly all transmitter antenna positions and allow for a neck-strap, the new transmitter glove is a must have item for low temperature flying conditions.
ade with a heavyweight zip, durable transparent cover that wont get brittle in sub zero temperatures and padded cotton/nylon material to insulate and protect against wind, snow and light rain.
You now have one less excuse to avoid getting outside and flying your model aircraft.
Universal Heater System features temperature adjustment and a thermal sensor to allow temperature control from 30 to 80 degrees celcious. With a voltage range of 7.4v to 12v the heater can be powered by a 2s to 3s lipo. Add one to your transmitter glove and fly in luxury this winter, warm the tyres on your car or pre-heat your lipo in winter or even summer for the best performance. Pre-heating a Lipo pack to 30degC in winter will give your model much better performance, right from the start.
Specs: Input: 7.4v to 12v Temperature: 30~80deg Celcious Sensor: LM35DZ - Precision Centigrade Temperature Sensor Heat Pads: 310x80mm Amp Draw: 5.2A @ 12v Input Connector: 2 x Alligator Clips
Quanum 2.4Ghz Telemetry System (Volt/Amp/Temp/mAh) V2
£86.00 / €106.64
The Quanum telemetry system gives real-time and accurate voltage, current, mAh and temperature display plus low voltage warnings via a robust 2.4Ghz DSSS connection. The receiver pannel is a large 132x64 LCD and attaches directly to your existing radios antenna for convenient at-a-glance in-flight status checks. The Quanum Telemetry system will also warn you when your battery pack is approaching 3.2v per cell with a variable audio tone. No more deadstick landings! And because its 2.4Ghz DSSS it wont interfere with your existing system, no matter what channel youre on! The Quanum Telemetry system transmits a narrow, lightweight signal 4 times a second and uses DSSS technology to ensure no conflicts with other systems close by. Included is an inbuilt 450mAh Li-ion power source and a convenient in-car and PC USB charge jack! Specification; Tx Weight: 16g Tx Size: 50x17.5mm Tx Output: 20dBm <100mW 2.4Ghz DSSS FCC ID: XR9V003
Included; Large high contrast 132x64 pixel LCD 2.4Ghz Receiver. (V2) 1km Range 1~6S Transmitter (V2) Receiver mount (universal type) Cigarette lighter 5v out USB charger USB cable. (Charge in car or on a PC) CE, FCC, RoHS Note: Current/temp sensor sold separately. below find out more
Button spirit level 2 pcs
£3.40 / €4.22
Button spirit level 2 pcs Excellent for flat surface leveling. Includes 2 spirit level buttons. Size: 25 x 9mm Weight: 3.3g
SUPER TIP We use it on our heli's equipped with Flymentor & Alien Command to level the heli before switching the power on. find out more
Helicopter Pitch Guage
£2.70 / €3.35
For setting the Pitch of the Helicopter Blades on your mini or micro helicopter find out more
NEW for January 2009 600 Size Pitch guage..
£14.60 / €18.10
Lightning heli trex t-rex 600 size rc r/c helicopter Big size Pitch Gauge tool (high quality metal and plastic material plus special water bubble level) Great for all 600 size and 50- size blades.
Lightning heli trex t-rex 600 size rc r/c helicopter Big size Pitch Gauge tool (high quality metal and plastic material plus special water bubble level) Great for all 600 size and 50- size blades.
OrangeRx Spektrum DSM2 9Ch 2.4Ghz TwinPort Rx NON OEM
£21.99 / €27.27
OrangeRx Spektrum DSM2 9Ch 2.4Ghz TwinPort Rx
Compatible with all Spektrum DSM2 Air transmitters. The new range of OrangeRx receivers are built using original components and MCUs and with state of the art SMT automation to ensure a quality product each and every time. All OrangeRx receivers are QC tested before leaving the factory. The OrangeRx will work with ANY Aircraft Spektrum DSM2 2.4Ghz transmitter. The OrangeRx 9ch is only 14g in weight and 46x30x14mm in size with case, Great for medium/small planes & helis, right up to large scale models. Key features. Super light weight 14g grams with case. Compatible with DSM2 1024/2048 aircraft radio and module systems. 9 Channels Analog & Digital servo Compact design 38mm x 26mm x 9mm, with case 46 x 30.7 x 14mm. Single 195mm antenna for mounting in almost any location. Input voltage: 3.7~9.6V. 2 x Satellite port included. TWIN SATELLITE PORTS 1 Port S.BUS OUT - Works with S.BUS servos and GY750.
Warranty. 12 Month replacement guarantee! Included. OrangeRx-9 DSM2 Compatible receiver NOTE i) This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. The Spektrum brand is a trademark of Horizon Hobbies USA. ii) Price of this receiver may fluctuate (up or down) due to cost of electronic components. iii) This is not an underground manufactured fake Spektrum receiver. OrangeRx quality is guaranteed. find out more
Wire Mesh Guard Black 8mm (1mtr)
£3.20 / €3.97
Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires. The mesh expands to 4x original size and comes in a variety of colours find out more
Etech Servo Tester Model: ETTL2638 Brand: Etech
£5.79 / €7.18
Product Information CCPM Servo Tester
Servo & CCPM Servo Consistency Master/Checker Size: 49x43x29mm Input: 4.8 ~ 6V Output up to 3 servos at once!
Makes setting up a plane or testing a servo easy!
You have your choice of 3 modes.
1. Manual using the knob
2. Neutral which will take your servo to it's neutral setting automatically
3. Auto which continuously cycles the servo limit to limit
Excellent W.S. Deans T-connector replacements. Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant. Hobbyking will begin to include the XT60 on all batteries up to 3,000mAh in capacity in the near future!
XT60, Designed to be more reliable and a better quality connection than Deans T-Connectors. There is no patent on the XT60 connector, we hope this product is sold everywhere in the world and dominates the market, reducing customers dependency on the over-priced Deans T-connector. Say No to the Deans Connector profiteers, and use XT-60s!
IMPORTANT These are not cheap copied XT60 plugs. These original Nylon XT60 plugs can handle over 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs. find out more
Finishing c metal washer for 3mm screws (10pcs) in BLUE
£2.99 / €3.71
Finishing c metal washer for 3mm screws (10pcs) in BLUE find out more
Digital Vernier Caliper Boxed with battery
£14.99 / €18.59
Boxed Vernier Caliper (digital with battery included. Great Value Tech Spec Resolution 0.01mm Power 1.5V LR44 Button battery Display reaction Time 1.5m/s Weight Aprox 150g Metric and Imperial ranges Extends to maximum size of 150 mm Warranty of manufacturer 5yrs
Actual vernier caliper may vary than box image but same functions and accuracy find out more
New Products
Thunder Tiger Pre Owned MD 500 Military Scale Helicopter 50 size
£450.00 / €558.00
Pre owned Thunder Tiger Helicopter in superb condition. Full Military style fuselage as shown. Carbon Blades fitted front and back Worthy of Inspection Collection only
3 Blade Scale Rotor Head for 500 size helicopter with 8MM main shaft size 500 Size Scale 3 Blades Rotor Head.
High quality thrust bearings allows for smooth and trouble free flights. The advanced follower make phasing better. Fully adjustable linkage rods makes this unit versatile for most machines and easily adaptable.
Features:
- No slop blade grip attachment - Designed to fit 120 degree ccpm - Fits all 8mm main shafts. - High Quality Thrust Bearings - Super Scale - Fits 500 size rotorblades with a root of 10mm
Included:
1. CNC Metal Rotor Hub 2. CNC Aluminum Scale Rotor Discs 3. CNC Aluminum Blade Grip extensions 4. CNC Aluminum Swash Plate 120 Degree ccpm 5. Linkage Arms The blade grips are pre assembled.Estimated time to complete assembly : 25-30 min. find out more
ALware 2 in 1 iPitch (For 200-700 Size Heli) Model: AL956467 Brand: ALware (only guage not i phone or any other devices shown
Features: - Wide range of gauge mount used for multiple digital level gauges. - Suitable for Etech Digital Pitch Gauge/ Iphones/ IPod Touch etc. - Suitable for mutiple size of Flybar/Flybarless Helicopters. - Auto-pressurization with three tension springs design. - Made of high quality fiber glass plates and springs. - Light in weight but strong. - Easy to use.
Designed to fit nearly all transmitter antenna positions and allow for a neck-strap, the new transmitter glove is a must have item for low temperature flying conditions.
ade with a heavyweight zip, durable transparent cover that wont get brittle in sub zero temperatures and padded cotton/nylon material to insulate and protect against wind, snow and light rain.
You now have one less excuse to avoid getting outside and flying your model aircraft.
Universal Heater System features temperature adjustment and a thermal sensor to allow temperature control from 30 to 80 degrees celcious. With a voltage range of 7.4v to 12v the heater can be powered by a 2s to 3s lipo. Add one to your transmitter glove and fly in luxury this winter, warm the tyres on your car or pre-heat your lipo in winter or even summer for the best performance. Pre-heating a Lipo pack to 30degC in winter will give your model much better performance, right from the start.
Specs: Input: 7.4v to 12v Temperature: 30~80deg Celcious Sensor: LM35DZ - Precision Centigrade Temperature Sensor Heat Pads: 310x80mm Amp Draw: 5.2A @ 12v Input Connector: 2 x Alligator Clips
This excellent smaller brother of the 1/6th Blue Bird is also capable of a great performance By using a 60mm to 68mm Ducted Fan unit and the combo of a 5mm prop drive and suitable motor you can propel the Blue Bird K7 along the water with not only speed but sounds of the turbine and realistic water disturbance.
The design and detail is the same as the larger model
1kg Range Accuracy 0.1g Power On Self Test, Automatic shutdown, overload Tips Auto-zero tracking, self-blue LED In addition to skin, set the zero function Fourth gear unit conversion: g / oz / ozt / dwt Power Supply: 3V Product Dimensions: 115 * 61 * 19 Display Box Size: 25mm Weighing Range: 500g/100g/1000g Accuracy: 0.1/0.01/0.1 find out more
AS350 Spare Part 2 1 x Hub & Bearing Assembly 700
£7.00 / €8.68
AS350 Spare Part 2 1 x Hub & Bearing Assembly 700 find out more
